3″ Air Diaphragm Pumps

All-Flo have a very large selection of 3″ Air Diaphragm Pumps, these are their best selling 3″ Air Pumps, please check Chemical Compatibility with your application. If you need different chemical resistance please contact Amerikal, or All-Flo directly.

# IMPORTANT NOTE#
Amerikal supplies all our air pumps with an Air Regulator Guage and Speed Control Valve at no charge.
These controls allow operators to reduce flow without stalling the pump.

Air Diaphragm Pumps Explained

Metal Diaphragm Pumps

3″ Air Pump Specification:

Max. Flow: 235 gpm
Max. Air Pressure: 120 psi

(2″ Air Pumps – Flow: 160 gpm)

3 in. Metal Pumps – A300

Max Solids: 7/16 in. (11 mm)
Max Suction Lift (Dry): 20 ft-H₂O Max Suction Lift (Wet): 31 ft-H₂O
Air Inlet: 1/4 in. FNPT

Available Build Materials:

Wet End: Aluminum, Anodized Aluminum, Stainless Steel
Diaphragm: Buna-N, Geolast®, PTFE, Santoprene®, Viton® / FKM
Balls: Buna-N, EPDM, Geolast®, PTFE, Santoprene®, Stainless Steel, Viton® / FKM
Seats: Aluminum, Polypropylene, Stainless Steel
O-Rings: Buna-N, EPDM, PTFE, Viton® / FKM
Hardware: Stainless Steel, Plated Steel

Air driven diaphragm pumps are a great solution for recirculating contaminated pressroom chemistry, functioning trouble free even under the harshest conditions.

Adopt the Genesis® range of Pressroom Solutions TODAY!

Check out our Very Competitive Pump Pricing

Contact For Pricing

Download Metal Air Pump Brochure

2″ Air Diaphragm Pumps

All-Flo have a very large selection of 2″ Air Diaphragm Pumps, these are their best selling 2″ Air Pumps, please check Chemical Compatibility with your application. If you need different chemical resistance please contact Amerikal, or All-Flo directly.

# IMPORTANT NOTE#
Amerikal supplies all our air pumps with an Air Regulator Guage and Speed Control Valve at no charge.
These controls allow operators to reduce flow without stalling the pump.

Air Diaphragm Pumps Explained

Plastic Diaphragm Pumps

2″ Air Pump Specification:

Max. Flow: 160 gpm
Max. Air Pressure: 120 psi

(1.5″ Air Pumps – Flow: 115 gpm)

2 in. Plastic Pumps – A200

Max Solids: 1/4 in. (6.4 mm)
Max Suction Lift (Dry): 17 ft-H₂O Max Suction Lift (Wet): 29 ft-H₂O
Air Inlet: 1/4 in. FNPT

Available Build Materials:

Wet End: Polypropylene, PVDF
Diaphragm: Geolast®, PTFE, Santoprene®, Viton® / FKM
Balls: Geolast®, PTFE, Santoprene®, Viton® / FKM
Seats: Polypropylene, PVDF, Stainless
O-Rings: Buna-N, EPDM, PTFE, Viton® / FKM
Hardware: PTFE Coated Stainless Steel, Stainless Steel

Polypropylene Air Diaphragm Pumps

A200-FPP-GGPN-S70

Polypropylene – Intermediate
Polypropylene – Fluid Chamber
Geolast® – Diaphragm
Geolast®– Valve/Ball
Polypropylene – Valve Seat
Nitrile – O-Rings
ANSI/DIN Flange

A200-FPP-SSPE-S70

Polypropylene – Intermediate
Polypropylene – Fluid Chamber
Santoprene® – Diaphragm
Santoprene® – Valve/Ball
Polypropylene – Valve Seat
EPDM – O-Rings
ANSI/DIN Flange

A200-FPP-TTPT-S70

Polypropylene – Intermediate
Polypropylene – Fluid Chamber
PTFE – Diaphragm
PTFE – Valve/Ball
Polypropylene – Valve Seat
PTFE – O-Rings
ANSI/DIN Flange

PVDF Air Diaphragm Pumps

A200-FPK-SSKE-S70

Polypropylene – Intermediate
PVDF – Fluid Chamber Material
Santoprene® – Diaphragm
Santoprene®– Valve/Ball
PVDF – Valve Seat
EPDM – O-Rings
ANSI/DIN Flange

A200-FPK-TTKT-S70

Polypropylene – Intermediate
PVDF – Fluid Chamber
PTFE – Diaphragm
PTFE – Valve/Ball
PVDF – Valve Seat
PTFE – O-Rings
ANSI/DIN Flange

Metal Diaphragm Pumps

2″ Air Pump Specification:

Max. Flow: 190 gpm
Max. Air Pressure: 120 psi

(3″ Air Pumps – Flow: 115 gpm)

2 in. Metal Pumps – A200

Max Solids: 1/4 in. (6.4 mm)
Max Suction Lift (Dry): 24.4 ft-H₂O
Max Suction Lift (Wet): 31.7 ft-H₂O
Air Inlet: 1/4 in. FNPT

Available Build Materials:

Wet End: Aluminum, Anodized Aluminum, Stainless Steel
Diaphragm: Buna-N, Geolast®, PTFE, Santoprene®, Viton® / FKM
Balls: Buna-N, EPDM, Geolast®, PTFE, Santoprene®, Stainless Steel, Viton® / FKM
Seats: Aluminum, Polypropylene, Stainless Steel
O-Rings: Buna-N, EPDM, PTFE, Viton® / FKM
Hardware: Stainless Steel, Plated Steel

Air driven diaphragm pumps are a great solution for recirculating contaminated pressroom chemistry, functioning trouble free even under the harshest conditions.

Adopt the Genesis® range of Pressroom Solutions TODAY!

Check out our Very Competitive Pump Pricing

Contact For Pricing

Download Plastic Air Pump Brochure

Download Metal Air Pump Brochure

1.5″ Air Diaphragm Pumps

All-Flo have a very large selection of 1.5″ Air Diaphragm Pumps, these are their best selling 1.5″ Air Pumps, please check Chemical Compatibility with your application. If you need different chemical resistance please contact Amerikal, or All-Flo directly.

# IMPORTANT NOTE#
Amerikal supplies all our air pumps with an Air Regulator Guage and Speed Control Valve at no charge.
These controls allow operators to reduce flow without stalling the pump.

Air Diaphragm Pumps Explained

Plastic Diaphragm Pumps

1.5″ Air Pump Specification:

Max. Flow: 130 gpm
Max. Air Pressure: 120 psi

(1″ Air Pumps – Flow: 41 gpm)

(2″ Air Pumps – Flow: 160 gpm)

1.5 in. Plastic Pumps – C150

Max Solids: 1/4 in. (6.4 mm)
Max Suction Lift (Dry): 13 ft-H₂O Max Suction Lift (Wet): 26 ft-H₂O
Air Inlet: 1/4 in. FNPT

Available Build Materials:

Wet End: Polypropylene, PVDF
Diaphragm: Geolast®, PTFE, Santoprene®, Viton® / FKM
Balls: Geolast®, PTFE, Santoprene®, Viton® / FKM
Seats: Polypropylene, PVDF, Stainless
O-Rings: Buna-N, EPDM, PTFE, Viton® / FKM
Hardware: PTFE Coated Stainless Steel, Stainless Steel

Polypropylene Air Diaphragm Pumps

C150-FPP-GGPN-B70

Polypropylene – Intermediate
Polypropylene – Fluid Chamber
Geolast® – Diaphragm
Geolast®– Valve/Ball
Polypropylene – Valve Seat
Nitrile – O-Rings
ANSI/DIN Flange

C150-FPP-SSPE-B70

Polypropylene – Intermediate
Polypropylene – Fluid Chamber
Santoprene® – Diaphragm
Santoprene® – Valve/Ball
Polypropylene – Valve Seat
EPDM – O-Rings
ANSI/DIN Flange

C150-FPP-TTPT-B70

Polypropylene – Intermediate
Polypropylene – Fluid Chamber
PTFE – Diaphragm
PTFE – Valve/Ball
Polypropylene – Valve Seat
PTFE – O-Rings
ANSI/DIN Flange

PVDF Air Diaphragm Pumps

C150-FPK-SSKE-B70

Polypropylene – Intermediate
PVDF – Fluid Chamber Material
Santoprene® – Diaphragm
Santoprene®– Valve/Ball
PVDF – Valve Seat
EPDM – O-Rings
ANSI/DIN Flange

C150-FPK-TTKT-B70

Polypropylene – Intermediate
PVDF – Fluid Chamber
PTFE – Diaphragm
PTFE – Valve/Ball
PVDF – Valve Seat
PTFE – O-Rings
ANSI/DIN Flange

Metal Diaphragm Pumps

1.5″ Air Pump Specification:

Max. Flow: 115 gpm
Max. Air Pressure: 120 psi

(1″ Air Pumps – Flow: 41 gpm)

(2″ Air Pumps – Flow: 160 gpm)

1.5 in. Metal Pumps – A150

Max Solids: 1/4 in. (6.4 mm)
Max Suction Lift (Dry): 22 ft-H₂O Max Suction Lift (Wet): 31 ft-H₂O
Air Inlet: 1/4 in. FNPT

Available Build Materials:

Wet End: Aluminum, Anodized Aluminum, Stainless Steel
Diaphragm: Buna-N, Geolast®, PTFE, Santoprene®, Viton® / FKM
Balls: Buna-N, EPDM, Geolast®, PTFE, Santoprene®, Stainless Steel, Viton® / FKM
Seats: Aluminum, Polypropylene, Stainless Steel
O-Rings: Buna-N, EPDM, PTFE, Viton® / FKM
Hardware: Stainless Steel, Plated Steel

Air driven diaphragm pumps are a great solution for recirculating contaminated pressroom chemistry, functioning trouble free even under the harshest conditions.

Adopt the Genesis® range of Pressroom Solutions TODAY!

Check out our Very Competitive Pump Pricing

Contact For Pricing

Download Plastic Air Pump Brochure

Download Metal Air Pump Brochure

1″ Air Diaphragm Pumps

All-Flo have a very large selection of 1″ Air Diaphragm Pumps, these are their best selling 1″ Air Pumps, please check Chemical Compatibility with your application. If you need different chemical resistance please contact Amerikal, or All-Flo directly.

# IMPORTANT NOTE#
Amerikal supplies all our air pumps with an Air Regulator Guage and Speed Control Valve at no charge.
These controls allow operators to reduce flow without stalling the pump.

Air Diaphragm Pumps Explained

Plastic Diaphragm Pumps

1″ Air Pump Specification:

Max. Flow: 41 gpm (64.6 lpm)
Max. Air Pressure: 120 psi (8.2 bar)

(3/4″ Air Pumps – Flow: 17 gpm)

(1.5″ Air Pumps – Flow: 115 gpm)

1 in. Plastic Pumps – A100

Max Solids: 1/4 in. (6.4 mm)
Max Suction Lift (Dry): 15 ft-H₂O Max Suction Lift (Wet): 26 ft-H₂O
Air Inlet: 1/4 in. FNPT

Available Build Materials:

Wet End: Polypropylene, PVDF
Diaphragm: Geolast®, PTFE, Santoprene®, Viton® / FKM
Balls: Geolast®, PTFE, Santoprene®, Viton® / FKM
Seats: Polypropylene, PVDF, Stainless
O-Rings: Buna-N, EPDM, PTFE, Viton® / FKM

Polypropylene Air Diaphragm Pumps

A100-FPP-GGPN-S70

Polypropylene – Intermediate
Polypropylene – Fluid Chamber
Geolast® – Diaphragm Material
Geolast®– Valve/Ball Material
Polypropylene – Valve Seat
Nitrile – O-Rings
ANSI/DIN Flange

A100-FPP-SSPE-S70

Polypropylene – Intermediate
Polypropylene – Fluid Chamber
Santoprene® – Diaphragm
Santoprene® – Valve/Ball
Polypropylene – Valve Seat
EPDM – O-Rings
ANSI/DIN Flange

A100-FPP-TTPT-S70

Polypropylene – Intermediate
Polypropylene – Fluid Chamber
PTFE – Diaphragm
PTFE – Valve/Ball
Polypropylene – Valve Seat
PTFE – O-Rings
ANSI/DIN Flange

PVDF Air Diaphragm Pumps

A100-FPK-SSKE-S70

Polypropylene – Intermediate
PVDF – Fluid Chamber Material
Santoprene® – Diaphragm
Santoprene®– Valve/Ball
PVDF – Valve Seat
EPDM – O-Rings
ANSI/DIN Flange

A100-NPK-TTKT-S70

Polypropylene – Intermediate
PVDF – Fluid Chamber
PTFE – Diaphragm
PTFE – Valve/Ball
PVDF – Valve Seat
PTFE – O-Rings
ANSI/DIN Flange

Metal Diaphragm Pumps

1″ Air Pump Specification:

Max. Flow: 48 gpm
Max. Air Pressure: 120 psi

(3/4″ Air Pumps – Flow: 15 gpm)

(1.5″ Air Pumps – Flow: 115 gpm)

1 in. Metal Pumps – A100

Max Solids: 1/4 in. (6.4 mm)
Max Suction Lift (Dry): 17 ft-H₂O Max Suction Lift (Wet): 30 ft-H₂O
Air Inlet: 1/4 in. FNPT

Available Build Materials:

Wet End: Aluminum, Anodized Aluminum, Stainless Steel
Diaphragm: Buna-N, Geolast®, PTFE, Santoprene®, Viton® / FKM
Balls: Buna-N, EPDM, Geolast®, PTFE, Santoprene®, Stainless Steel, Viton® / FKM
Seats: Aluminum, Nylon, Polypropylene, Stainless Steel
O-Rings: Buna-N, EPDM, PTFE, Viton® / FKM
Hardware: Stainless Steel, Plated Steel

Air driven diaphragm pumps are a great solution for recirculating contaminated pressroom chemistry, functioning trouble free even under the harshest conditions.

Adopt the Genesis® range of Pressroom Solutions TODAY!

Check out our Very Competitive Pump Pricing

Contact For Pricing

Download Plastic Air Pump Brochure

Download Metal Air Pump Brochure

3/4″ Air Diaphragm Pumps

All-Flo have a very large selection of 3/4″ Air Diaphragm Pumps, these are their best selling 3/4″ Air Pumps, please check Chemical Compatibility with your application. If you need different chemical resistance please contact Amerikal, or All-Flo directly.

# IMPORTANT NOTE#
Amerikal supplies all our air pumps with an Air Regulator Guage and Speed Control Valve at no charge.
These controls allow operators to reduce flow without stalling the pump.

Air Diaphragm Pumps Explained

3/4″ Air Pump Specification:

Max. Flow: 17 gpm (64.6 lpm)
Max. Air Pressure: 120 psi (8.2 bar)

(3/8″ Air Pumps – Flow: 9 gpm)

(1″ Air Pumps – Flow: 41 gpm)

3/4 in. Plastic Pumps – A075

Max Solids: 1/8 in. (3.2 mm)
Max Suction Lift (Dry): 15 ft-H₂O Max Suction Lift (Wet): 26 ft-H₂O
Air Inlet: 1/4 in. FNPT

Available Build Materials:

Diaphragm: Geolast®, PTFE, Santoprene®, Viton® / FKM
Balls: Geolast®, PTFE, Santoprene®, Viton® / FKM
Seats: Polypropylene, PVDF, Stainless
O-Rings: Buna-N, EPDM, PTFE, Viton® / FKM
Liquid Connections Available in: FNPT, FBSPT
Hardware: PTFE Coated Stainless Steel, Stainless Steel

Polypropylene Air Diaphragm Pumps

A075-NPP-GGPN-S70

Polypropylene – Intermediate
Polypropylene – Fluid Chamber
Geolast® – Diaphragm Material
Geolast®– Valve/Ball Material
Polypropylene – Valve Seat
Nitrile – O-Rings
NPT(BSP) – Fitting

A075-NPP-SSPE-S70

Polypropylene – Intermediate
Polypropylene – Fluid Chamber
Santoprene® – Diaphragm
Santoprene® – Valve/Ball
Polypropylene – Valve Seat
EPDM – O-Rings
NPT(BSP) – Fitting

A075-NPP-TTPT-S70

Polypropylene – Intermediate
Polypropylene – Fluid Chamber
PTFE – Diaphragm
PTFE – Valve/Ball
Polypropylene – Valve Seat
PTFE – O-Rings
NPT(BSP) – Fitting

PVDF Air Diaphragm Pumps

A075-NPK-SSKE-S70

Polypropylene – Intermediate
PVDF – Fluid Chamber Material
Santoprene® – Diaphragm
Santoprene®– Valve/Ball
PVDF – Valve Seat
EPDM – O-Rings
NPT(BSPT) – Fitting

A075-NPK-TTKT-S70

Polypropylene – Intermediate
PVDF – Fluid Chamber
PTFE – Diaphragm
PTFE – Valve/Ball
PVDF – Valve Seat
PTFE – O-Rings
NPT(BSPT) – Fitting

Conductive Nylon Air Pumps

A075-NA3-TT3T-A70

Polypropylene – Intermediate
Conductive Nylon – Fluid Chamber
PTFE – Diaphragm
PTFE – Valve/Ball
Stainless Steel – Valve Seat
PTFE – O-Rings
NPT(BSPT) – Fitting

A075-NAA-TTYT-A30

Aluminium – Intermediate
Aluminium – Fluid Chamber
PTFE – Diaphragm
PTFE – Valve/Ball
Nylon – Valve Seat
PTFE – O-Rings
NPT(BSPT) – Fitting

Air driven diaphragm pumps are a great solution for recirculating contaminated pressroom chemistry, functioning trouble free even under the harshest conditions.

Adopt the Genesis® range of Pressroom Solutions TODAY!

Check out our Very Competitive Air Pump Pricing

Contact For Pricing

Download Brochure

1/2″ Air Diaphragm Pumps

All-Flo have a very large selection of 1/2″ Air Diaphragm Pumps, these are their best selling 1/2″ Air Pumps, please check Chemical Compatibility with your application. If you need different chemical resistance please contact Amerikal, or All-Flo directly.

# IMPORTANT NOTE#
Amerikal supplies all our air pumps with an Air Regulator Guage and Speed Control Valve at no charge.
These controls allow operators to reduce flow without stalling the pump.

Air Diaphragm Pumps Explained

Plastic Diaphragm Pumps

1/2″ Air Pump Specification..

Max. Flow: 17 gpm (64.6 lpm)
Max. Air Pressure: 120 psi (8.2 bar)

(3/8″ Air Pumps – Flow: 9 gpm)

( 1″ Air Pumps – Flow: 41 gpm)

1/2 in. Plastic Pumps – A050

Max Solids: 1/8 in. (3.2 mm)
Max Suction Lift (Dry): 15 ft-H₂O
Max Suction Lift (Wet): 26 ft-H₂O
Air Inlet: 1/4 in. FNPT

Available Build Materials:

Wet End: Conductive Nylon, Polypropylene, PVDF
Diaphragm: Geolast®, PTFE, Santoprene®, Viton® / FKM
Balls: Geolast®, PTFE, Santoprene®, Viton® / FKM
Seats: Nylon, Polypropylene, PVDF
O-Rings: Buna-N, EPDM, PTFE, Viton® / FKM
Hardware: PTFE Coated Stainless Steel, Stainless Steel

Polypropylene Air Diaphragm Pumps

A050-SPP-GGPN-S70

Polypropylene – Intermediate Material
Polypropylene – Fluid Chamber Material
Geolast® – Diaphragm Material
Geolast®– Valve/Ball Material
Polypropylene – Valve Seat Material
Nitrile – O-Rings
NPT(BSP) – Fitting

A050-SPP-SSPE-S70

Polypropylene – Intermediate Material
Polypropylene – Fluid Chamber Material
Santoprene® – Diaphragm Material
Santoprene® – Valve/Ball Material
Polypropylene – Valve Seat Material
EPDM – O-Rings
NPT(BSP) – Fitting

A050-SPP-TTPT-S70

Polypropylene – Intermediate Material
Polypropylene – Fluid Chamber Material
PTFE – Diaphragm Material
PTFE – Valve/Ball Material
Polypropylene – Valve Seat Material
PTFE – O-Rings
NPT(BSP) – Fitting

PVDF Air Diaphragm Pumps

A050-SPK-SSKE-S70

Polypropylene – Intermediate Material
PVDF – Fluid Chamber Material
Santoprene® – Diaphragm Material
Santoprene®– Valve/Ball Material
PVDF – Valve Seat Material
EPDM – O-Rings
NPT(BSP) – Fitting

A050-SPK-TTKT-S70

Polypropylene – Intermediate Material
PVDF – Fluid Chamber Material
PTFE – Diaphragm Material
PTFE – Valve/Ball Material
PVDF – Valve Seat Material
PTFE – O-Rings
NPT(BSP) – Fitting

Conductive Nylon Air Pumps

A050-SPY-TT3T-SF0

Polypropylene – Intermediate Material
Conductive Nylon – Fluid Chamber Material
PTFE – Diaphragm Material
PTFE – Valve/Ball Material
Stainless Steel – Valve Seat Material
PTFE – O-Rings
NPT(BSP) – Fitting

Metal Diaphragm Pumps

1/2″ Air Pump Specification..

Max. Flow: 15 gpm
Max. Air Pressure: 120 psi

( 1″ Air Pumps – Flow: 48 gpm)

1/2 in. Metal Pumps – A050

Max Solids: 1/8 in. (3.2 mm)
Max Suction Lift (Dry): 15 ft-H₂O
Max Suction Lift (Wet): 31 ft-H₂O
Air Inlet: 1/4 in. FNPT

Available Build Materials:

Wet End: Aluminum, Anodized Aluminum, Stainless Steel
Diaphragm: Geolast®, PTFE, Santoprene®, Viton® / FKM
Balls: Geolast®, PTFE, Santoprene®, Stainless Steel, Viton® / FKM
Seats: Aluminum, Nylon, Polypropylene, Stainless Steel
O-Rings: Buna-N, EPDM, PTFE, Viton® / FKM
Hardware: Stainless Steel, Zinc Plated Steel

Air driven diaphragm pumps are a great solution for recirculating contaminated pressroom chemistry, functioning trouble free even under the harshest conditions.

Adopt the Genesis® range of Pressroom Solutions TODAY!

Check out our Very Competitive Air Pump Pricing

Contact For Pricing

Download Plastic Pump Brochure

Download Metal Pump Brochure

3/8″ Air Diaphragm Pumps

All-Flo have a very large selection of 3/8″ Air Diaphragm Pumps, these are their best selling 3/8″ Air Pumps, please check Chemical Compatibility with your application. If you need different chemical resistance please contact Amerikal, or All-Flo directly.

# IMPORTANT NOTE#
Amerikal supplies all our air pumps with an Air Regulator Guage and Speed Control Valve at no charge.
These controls allow operators to reduce flow without stalling the pump.

Air Diaphragm Pumps Explained

3/8″ Pump Specification..

Max. Flow: 9 gpm (34 lpm)
Max. Air Pressure: 120 psi (8.2 bar)

(1/4″ Air Pumps – Flow: 5.7 gpm)

(1/2″ Air Pumps – Flow: 17 gpm)

3/8 in. Plastic Pumps – C038

Max Solids: 1/16 in. (1.6 mm)
Max Suction Lift (Dry): 15 ft-H₂O
Max Suction Lift (Wet): 26 ft-H₂O
Air Inlet: 1/4 in. FNPT

Available Build Materials:

Wet End: Conductive Nylon, Polypropylene, PVDF
Diaphragm: Geolast®, PTFE, Santoprene®
Balls: Geolast®, PTFE, Santoprene®, Viton® / FKM
Seats: Polypropylene, PVDF
O-Rings: Buna-N, EPDM, PTFE, Viton® / FKM
Hardware: PTFE Coated Stainless Steel, Stainless Steel

Polypropylene Air Diaphragm Pumps

C038-SQP-GGPN-S70

Polypropylene – Intermediate Material
Polypropylene – Fluid Chamber Material
Geolast® – Diaphragm Material
Geolast®– Valve/Ball Material
Polypropylene – Valve Seat Material
Nitrile – O-Rings
NPT(BSP) – Fitting

C038-SQP-SSPE-S70

Polypropylene – Intermediate Material
Polypropylene – Fluid Chamber Material
Santoprene® – Diaphragm Material
Santoprene® – Valve/Ball Material
Polypropylene – Valve Seat Material
EPDM – O-Rings
NPT(BSP) – Fitting

C038-SQP-TTPT-S70

Polypropylene – Intermediate Material
Polypropylene – Fluid Chamber Material
PTFE – Diaphragm Material
PTFE – Valve/Ball Material
Polypropylene – Valve Seat Material
PTFE – O-Rings
NPT(BSP) – Fitting

PVDF Air Diaphragm Pumps

C038-SQK-SSKE-S70

Polypropylene – Intermediate Material
PVDF – Fluid Chamber Material
Santoprene® – Diaphragm Material
Santoprene®– Valve/Ball Material
PVDF – Valve Seat Material
EPDM – O-Rings
NPT(BSP) – Fitting

C038-SQK-TVKT-S70

Polypropylene – Intermediate Material
PVDF – Fluid Chamber Material
PTFE – Diaphragm Material
PTFE – Valve/Ball Material
PVDF – Valve Seat Material
PTFE – O-Rings
NPT(BSP) – Fitting

Conductive Nylon Air Pumps

C038-SQY-TT3T-SF0

Polypropylene – Intermediate Material
Conductive Nylon – Fluid Chamber Material
PTFE – Diaphragm Material
PTFE – Valve/Ball Material
Stainless Steel – Valve Seat Material
PTFE – O-Rings
NPT(BSP) – Fitting

Air driven diaphragm pumps are a great solution for recirculating contaminated pressroom chemistry, functioning trouble free even under the harshest conditions.

Adopt the Genesis® range of Pressroom Solutions TODAY!

Check out our Very Competitive Pump Pricing

Contact For Pricing

Download Brochure

1/4″ Air Diaphragm Pumps

All-Flo have a very large selection of 1/4″ Air Diaphragm Pumps, these are their best selling 1/4″ Air Pumps, please check Chemical Compatibility with your application. If you need different chemical resistance please contact Amerikal, or All-Flo directly.

# IMPORTANT NOTE#
Amerikal supplies all our air pumps with an Air Regulator Guage and Speed Control Valve at no charge.
These controls allow operators to reduce flow without stalling the pump.

Air Diaphragm Pumps Explained

1/4″ Pump Specification..

Max. Flow: 5.7 gpm (21.6 lpm)
Max. Air Pressure: 120 psi (8.2 bar)

(3/8″ Air Pumps – Flow: 9 gpm)

1/4 in. Plastic Pumps – A025

Max Solids: 1/16 in. (1.6 mm)
Max Suction Lift (Dry): 14 ft-H₂O
Max Suction Lift (Wet): 28 ft-H₂O
Air Inlet: 1/4 in. FNPT

Available Build Materials:

Wet End: Polypropylene, PVDF
Air End: Polypropylene
Diaphragm: Geolast®, PTFE, Santoprene®
Balls: Geolast®, PTFE, Santoprene®
Seats: Polypropylene, PVDF
O-Rings: Buna-N, EPDM, PTFE, Viton® / FKM
Hardware: PTFE Coated Stainless Steel, Stainless Steel

These are the best selling 1/4″ All-Flo Air Pumps. If you need different chemical resistance please contact us or All-Flo directly.

Polypropylene Air Diaphragm Pumps

A025-SPP-GGPN-S70

Polypropylene – Intermediate Material
Polypropylene – Fluid Chamber Material
Geolast® – Diaphragm Material
Geolast®– Valve/Ball Material
Polypropylene – Valve Seat Material
Buna-N – O-Rings
FNPS – Fitting

A025-SPP-SSPE-S70

Polypropylene – Intermediate Material
Polypropylene – Fluid Chamber Material
Santoprene® – Diaphragm Material
Santoprene® – Valve/Ball Material
Polypropylene – Valve Seat Material
EPDM – O-Rings
FNPS – Fitting

A025-SPP-TTPV-S70

Polypropylene – Intermediate Material
Polypropylene – Fluid Chamber Material
PTFE – Diaphragm Material
PTFE – Valve/Ball Material
Polypropylene – Valve Seat Material
Viton – O-Rings
FNPS – Fitting

PVDF Air Diaphragm Pumps

A025-SPK-SSKE-S70

Polypropylene – Intermediate Material
PVDF – Fluid Chamber Material
Santoprene® – Diaphragm Material
Santoprene®– Valve/Ball Material
PVDF – Valve Seat Material
EPDM – O-Rings
FNPS – Fitting

A025-SPK-TTKV-S70

Polypropylene – Intermediate Material
PVDF – Fluid Chamber Material
PTFE – Diaphragm Material
PTFE – Valve/Ball Material
PVDF – Valve Seat Material
Viton® – O-Rings
FNPS – Fitting

Air driven diaphragm pumps are a great solution for recirculating contaminated pressroom chemistry, functioning trouble free even under the harshest conditions.

Adopt the Genesis® range of Pressroom Solutions TODAY!

Check out our Very Competitive Pump Pricing

Contact For Pricing

Download Brochure

Air Operated Double Diaphragm Pumps Explained

Air Operated Double
Diaphragm Pumps Explained

High Quality Air Pumps for The Printing Industry

Amerikal is a distributor for All-Flo “THE” quality manufacturer for air operated double diaphragm pumps.
Due to their operation and construction explained below, diaphragm pumps are uniquely suited to the harsh environments and chemical resistance needed to operate trouble free in printing operations 24/7/365.

Amerikal is very pleased to be able to offer the entire range of All-Flo pumps to all industries, not only below list price, but we also include an..

Air Regulator / Gauge plus a Speed Control Valve at no additional charge.

Diaphragm Pump Selection Guide

Main Advantages of Air Diaphragm Pumps



Run Dry

While alternate pumps will cavitate, overheat, or simply fail, diaphragm pumps can handle interuptions in fluid supply.

\

Self Priming

Diaphragm pumps will not only run dry without damage if flow is interupted, they will self prime when fluid becomes available.

N

Solid Contaminants

Having minimal internal parts solid contaminents of a certain size can pass straight through the pump without damage.
Check Specifications

U

Chemical Resistance

Pumps are fabricated from many chemical resistant materials, chose the correct materials for your application.

Chemical Chart

DESIGNED TO REDUCE
ENERGY COSTS

[et_pb_hw_image_zoom src=”https://amerikal.com/wp-content/uploads/High-Efficiency-Pump.png” hw_iz_zoom_on=”on” hw_iz_zoom_amount=”1.5″ hw_iz_zoom_speed=”2.5″ _builder_version=”3.22.7″ _i=”1″ _address=”1.0.1″][/et_pb_hw_image_zoom]

Designed to ensure significant energy savings for customers, All-Flo pumps raise the bar on efficiency standards across the industry. The newly-designed All-Flo pumps boast a high-efficiency air valve, making them the most energy efficient and cost-effective pumps in the industry

Simple Design

All-Flo’s simple air valve design allows for maximum efficiency

Simple Repair

Simple leak free bolted
design promotes swift
and seamless repairs

Operating Costs

All-Flo pumps yield
energy savings of
35-67% v competitors

Connection and Footprint

Multiple connection
types & footprint to match
competitors’ models

How an Air Operated Double Diaphragm Pump Works

Download Product Catalog

Best Selling All-Flo Pumps

Plastic Diaphragm Pumps

All-Flo Plastic Pumps are available in:

1/4" Pump - A025

Max Flow: 5.7 gpm
Max Solids: 1/16 in.
Max Lift (Dry): 14 ft-H₂O
Max Lift (Wet): 28 ft-H₂O

1" Pump - A100

Max Flow: 41 gpm
Max Solids: 1/4 in.
Max Lift (Dry): 15 ft-H₂O
Max Lift (Wet): 26 ft-H₂O

3/8" Pump - C038

Max Flow: 9 gpm
Max Solids: 1/16 in.
Max Lift (Dry): 15 ft-H₂O
Max Lift (Wet): 26 ft-H₂O

11/2" Pump - C150

Max Flow: 130 gpm
Max Solids: 1/4 in.
Max Lift (Dry): 13 ft-H₂O
Max Lift (Wet): 26 ft-H₂O

1/2" Pump - A050

Max Flow: 17 gpm
Max Solids: 1/8 in.
Max Lift (Dry): 15 ft-H₂O
Max Lift (Wet): 26 ft-H₂O

2" Pump - A200

Max Flow: 160 gpm
Max Solids: 1/4 in.
Max Lift (Dry): 17 ft-H₂O
Max Lift (Wet): 29 ft-H₂O

3/4" Pump - A075

Max Flow: 17 gpm
Max Solids: 1/8 in.
Max Lift (Dry): 15 ft-H₂O
Max Lift (Wet): 26 ft-H₂O

Metal Diaphragm Pumps

Contact Amerikal For Pricing

Higher Quality does not need to cost more – No-one Beats our Prices

See How Much You Can Save!