3″ Air Diaphragm Pumps

All-Flo have a very large selection of 3″ Air Diaphragm Pumps, these are their best selling 3″ Air Pumps, please check Chemical Compatibility with your application. If you need different chemical resistance please contact Amerikal, or All-Flo directly.

# IMPORTANT NOTE#
Amerikal supplies all our air pumps with an Air Regulator Guage and Speed Control Valve at no charge.
These controls allow operators to reduce flow without stalling the pump.

Air Diaphragm Pumps Explained

Metal Diaphragm Pumps

3″ Air Pump Specification:

Max. Flow: 235 gpm
Max. Air Pressure: 120 psi

(2″ Air Pumps – Flow: 160 gpm)

3 in. Metal Pumps – A300

Max Solids: 7/16 in. (11 mm)
Max Suction Lift (Dry): 20 ft-H₂O Max Suction Lift (Wet): 31 ft-H₂O
Air Inlet: 1/4 in. FNPT

Available Build Materials:

Wet End: Aluminum, Anodized Aluminum, Stainless Steel
Diaphragm: Buna-N, Geolast®, PTFE, Santoprene®, Viton® / FKM
Balls: Buna-N, EPDM, Geolast®, PTFE, Santoprene®, Stainless Steel, Viton® / FKM
Seats: Aluminum, Polypropylene, Stainless Steel
O-Rings: Buna-N, EPDM, PTFE, Viton® / FKM
Hardware: Stainless Steel, Plated Steel

Air driven diaphragm pumps are a great solution for recirculating contaminated pressroom chemistry, functioning trouble free even under the harshest conditions.

Adopt the Genesis® range of Pressroom Solutions TODAY!

Check out our Very Competitive Pump Pricing

Contact For Pricing

Download Metal Air Pump Brochure

2″ Air Diaphragm Pumps

All-Flo have a very large selection of 2″ Air Diaphragm Pumps, these are their best selling 2″ Air Pumps, please check Chemical Compatibility with your application. If you need different chemical resistance please contact Amerikal, or All-Flo directly.

# IMPORTANT NOTE#
Amerikal supplies all our air pumps with an Air Regulator Guage and Speed Control Valve at no charge.
These controls allow operators to reduce flow without stalling the pump.

Air Diaphragm Pumps Explained

Plastic Diaphragm Pumps

2″ Air Pump Specification:

Max. Flow: 160 gpm
Max. Air Pressure: 120 psi

(1.5″ Air Pumps – Flow: 115 gpm)

2 in. Plastic Pumps – A200

Max Solids: 1/4 in. (6.4 mm)
Max Suction Lift (Dry): 17 ft-H₂O Max Suction Lift (Wet): 29 ft-H₂O
Air Inlet: 1/4 in. FNPT

Available Build Materials:

Wet End: Polypropylene, PVDF
Diaphragm: Geolast®, PTFE, Santoprene®, Viton® / FKM
Balls: Geolast®, PTFE, Santoprene®, Viton® / FKM
Seats: Polypropylene, PVDF, Stainless
O-Rings: Buna-N, EPDM, PTFE, Viton® / FKM
Hardware: PTFE Coated Stainless Steel, Stainless Steel

Polypropylene Air Diaphragm Pumps

A200-FPP-GGPN-S70

Polypropylene – Intermediate
Polypropylene – Fluid Chamber
Geolast® – Diaphragm
Geolast®– Valve/Ball
Polypropylene – Valve Seat
Nitrile – O-Rings
ANSI/DIN Flange

A200-FPP-SSPE-S70

Polypropylene – Intermediate
Polypropylene – Fluid Chamber
Santoprene® – Diaphragm
Santoprene® – Valve/Ball
Polypropylene – Valve Seat
EPDM – O-Rings
ANSI/DIN Flange

A200-FPP-TTPT-S70

Polypropylene – Intermediate
Polypropylene – Fluid Chamber
PTFE – Diaphragm
PTFE – Valve/Ball
Polypropylene – Valve Seat
PTFE – O-Rings
ANSI/DIN Flange

PVDF Air Diaphragm Pumps

A200-FPK-SSKE-S70

Polypropylene – Intermediate
PVDF – Fluid Chamber Material
Santoprene® – Diaphragm
Santoprene®– Valve/Ball
PVDF – Valve Seat
EPDM – O-Rings
ANSI/DIN Flange

A200-FPK-TTKT-S70

Polypropylene – Intermediate
PVDF – Fluid Chamber
PTFE – Diaphragm
PTFE – Valve/Ball
PVDF – Valve Seat
PTFE – O-Rings
ANSI/DIN Flange

Metal Diaphragm Pumps

2″ Air Pump Specification:

Max. Flow: 190 gpm
Max. Air Pressure: 120 psi

(3″ Air Pumps – Flow: 115 gpm)

2 in. Metal Pumps – A200

Max Solids: 1/4 in. (6.4 mm)
Max Suction Lift (Dry): 24.4 ft-H₂O
Max Suction Lift (Wet): 31.7 ft-H₂O
Air Inlet: 1/4 in. FNPT

Available Build Materials:

Wet End: Aluminum, Anodized Aluminum, Stainless Steel
Diaphragm: Buna-N, Geolast®, PTFE, Santoprene®, Viton® / FKM
Balls: Buna-N, EPDM, Geolast®, PTFE, Santoprene®, Stainless Steel, Viton® / FKM
Seats: Aluminum, Polypropylene, Stainless Steel
O-Rings: Buna-N, EPDM, PTFE, Viton® / FKM
Hardware: Stainless Steel, Plated Steel

Air driven diaphragm pumps are a great solution for recirculating contaminated pressroom chemistry, functioning trouble free even under the harshest conditions.

Adopt the Genesis® range of Pressroom Solutions TODAY!

Check out our Very Competitive Pump Pricing

Contact For Pricing

Download Plastic Air Pump Brochure

Download Metal Air Pump Brochure

1.5″ Air Diaphragm Pumps

All-Flo have a very large selection of 1.5″ Air Diaphragm Pumps, these are their best selling 1.5″ Air Pumps, please check Chemical Compatibility with your application. If you need different chemical resistance please contact Amerikal, or All-Flo directly.

# IMPORTANT NOTE#
Amerikal supplies all our air pumps with an Air Regulator Guage and Speed Control Valve at no charge.
These controls allow operators to reduce flow without stalling the pump.

Air Diaphragm Pumps Explained

Plastic Diaphragm Pumps

1.5″ Air Pump Specification:

Max. Flow: 130 gpm
Max. Air Pressure: 120 psi

(1″ Air Pumps – Flow: 41 gpm)

(2″ Air Pumps – Flow: 160 gpm)

1.5 in. Plastic Pumps – C150

Max Solids: 1/4 in. (6.4 mm)
Max Suction Lift (Dry): 13 ft-H₂O Max Suction Lift (Wet): 26 ft-H₂O
Air Inlet: 1/4 in. FNPT

Available Build Materials:

Wet End: Polypropylene, PVDF
Diaphragm: Geolast®, PTFE, Santoprene®, Viton® / FKM
Balls: Geolast®, PTFE, Santoprene®, Viton® / FKM
Seats: Polypropylene, PVDF, Stainless
O-Rings: Buna-N, EPDM, PTFE, Viton® / FKM
Hardware: PTFE Coated Stainless Steel, Stainless Steel

Polypropylene Air Diaphragm Pumps

C150-FPP-GGPN-B70

Polypropylene – Intermediate
Polypropylene – Fluid Chamber
Geolast® – Diaphragm
Geolast®– Valve/Ball
Polypropylene – Valve Seat
Nitrile – O-Rings
ANSI/DIN Flange

C150-FPP-SSPE-B70

Polypropylene – Intermediate
Polypropylene – Fluid Chamber
Santoprene® – Diaphragm
Santoprene® – Valve/Ball
Polypropylene – Valve Seat
EPDM – O-Rings
ANSI/DIN Flange

C150-FPP-TTPT-B70

Polypropylene – Intermediate
Polypropylene – Fluid Chamber
PTFE – Diaphragm
PTFE – Valve/Ball
Polypropylene – Valve Seat
PTFE – O-Rings
ANSI/DIN Flange

PVDF Air Diaphragm Pumps

C150-FPK-SSKE-B70

Polypropylene – Intermediate
PVDF – Fluid Chamber Material
Santoprene® – Diaphragm
Santoprene®– Valve/Ball
PVDF – Valve Seat
EPDM – O-Rings
ANSI/DIN Flange

C150-FPK-TTKT-B70

Polypropylene – Intermediate
PVDF – Fluid Chamber
PTFE – Diaphragm
PTFE – Valve/Ball
PVDF – Valve Seat
PTFE – O-Rings
ANSI/DIN Flange

Metal Diaphragm Pumps

1.5″ Air Pump Specification:

Max. Flow: 115 gpm
Max. Air Pressure: 120 psi

(1″ Air Pumps – Flow: 41 gpm)

(2″ Air Pumps – Flow: 160 gpm)

1.5 in. Metal Pumps – A150

Max Solids: 1/4 in. (6.4 mm)
Max Suction Lift (Dry): 22 ft-H₂O Max Suction Lift (Wet): 31 ft-H₂O
Air Inlet: 1/4 in. FNPT

Available Build Materials:

Wet End: Aluminum, Anodized Aluminum, Stainless Steel
Diaphragm: Buna-N, Geolast®, PTFE, Santoprene®, Viton® / FKM
Balls: Buna-N, EPDM, Geolast®, PTFE, Santoprene®, Stainless Steel, Viton® / FKM
Seats: Aluminum, Polypropylene, Stainless Steel
O-Rings: Buna-N, EPDM, PTFE, Viton® / FKM
Hardware: Stainless Steel, Plated Steel

Air driven diaphragm pumps are a great solution for recirculating contaminated pressroom chemistry, functioning trouble free even under the harshest conditions.

Adopt the Genesis® range of Pressroom Solutions TODAY!

Check out our Very Competitive Pump Pricing

Contact For Pricing

Download Plastic Air Pump Brochure

Download Metal Air Pump Brochure

1″ Air Diaphragm Pumps

All-Flo have a very large selection of 1″ Air Diaphragm Pumps, these are their best selling 1″ Air Pumps, please check Chemical Compatibility with your application. If you need different chemical resistance please contact Amerikal, or All-Flo directly.

# IMPORTANT NOTE#
Amerikal supplies all our air pumps with an Air Regulator Guage and Speed Control Valve at no charge.
These controls allow operators to reduce flow without stalling the pump.

Air Diaphragm Pumps Explained

Plastic Diaphragm Pumps

1″ Air Pump Specification:

Max. Flow: 41 gpm (64.6 lpm)
Max. Air Pressure: 120 psi (8.2 bar)

(3/4″ Air Pumps – Flow: 17 gpm)

(1.5″ Air Pumps – Flow: 115 gpm)

1 in. Plastic Pumps – A100

Max Solids: 1/4 in. (6.4 mm)
Max Suction Lift (Dry): 15 ft-H₂O Max Suction Lift (Wet): 26 ft-H₂O
Air Inlet: 1/4 in. FNPT

Available Build Materials:

Wet End: Polypropylene, PVDF
Diaphragm: Geolast®, PTFE, Santoprene®, Viton® / FKM
Balls: Geolast®, PTFE, Santoprene®, Viton® / FKM
Seats: Polypropylene, PVDF, Stainless
O-Rings: Buna-N, EPDM, PTFE, Viton® / FKM

Polypropylene Air Diaphragm Pumps

A100-FPP-GGPN-S70

Polypropylene – Intermediate
Polypropylene – Fluid Chamber
Geolast® – Diaphragm Material
Geolast®– Valve/Ball Material
Polypropylene – Valve Seat
Nitrile – O-Rings
ANSI/DIN Flange

A100-FPP-SSPE-S70

Polypropylene – Intermediate
Polypropylene – Fluid Chamber
Santoprene® – Diaphragm
Santoprene® – Valve/Ball
Polypropylene – Valve Seat
EPDM – O-Rings
ANSI/DIN Flange

A100-FPP-TTPT-S70

Polypropylene – Intermediate
Polypropylene – Fluid Chamber
PTFE – Diaphragm
PTFE – Valve/Ball
Polypropylene – Valve Seat
PTFE – O-Rings
ANSI/DIN Flange

PVDF Air Diaphragm Pumps

A100-FPK-SSKE-S70

Polypropylene – Intermediate
PVDF – Fluid Chamber Material
Santoprene® – Diaphragm
Santoprene®– Valve/Ball
PVDF – Valve Seat
EPDM – O-Rings
ANSI/DIN Flange

A100-NPK-TTKT-S70

Polypropylene – Intermediate
PVDF – Fluid Chamber
PTFE – Diaphragm
PTFE – Valve/Ball
PVDF – Valve Seat
PTFE – O-Rings
ANSI/DIN Flange

Metal Diaphragm Pumps

1″ Air Pump Specification:

Max. Flow: 48 gpm
Max. Air Pressure: 120 psi

(3/4″ Air Pumps – Flow: 15 gpm)

(1.5″ Air Pumps – Flow: 115 gpm)

1 in. Metal Pumps – A100

Max Solids: 1/4 in. (6.4 mm)
Max Suction Lift (Dry): 17 ft-H₂O Max Suction Lift (Wet): 30 ft-H₂O
Air Inlet: 1/4 in. FNPT

Available Build Materials:

Wet End: Aluminum, Anodized Aluminum, Stainless Steel
Diaphragm: Buna-N, Geolast®, PTFE, Santoprene®, Viton® / FKM
Balls: Buna-N, EPDM, Geolast®, PTFE, Santoprene®, Stainless Steel, Viton® / FKM
Seats: Aluminum, Nylon, Polypropylene, Stainless Steel
O-Rings: Buna-N, EPDM, PTFE, Viton® / FKM
Hardware: Stainless Steel, Plated Steel

Air driven diaphragm pumps are a great solution for recirculating contaminated pressroom chemistry, functioning trouble free even under the harshest conditions.

Adopt the Genesis® range of Pressroom Solutions TODAY!

Check out our Very Competitive Pump Pricing

Contact For Pricing

Download Plastic Air Pump Brochure

Download Metal Air Pump Brochure

3/4″ Air Diaphragm Pumps

All-Flo have a very large selection of 3/4″ Air Diaphragm Pumps, these are their best selling 3/4″ Air Pumps, please check Chemical Compatibility with your application. If you need different chemical resistance please contact Amerikal, or All-Flo directly.

# IMPORTANT NOTE#
Amerikal supplies all our air pumps with an Air Regulator Guage and Speed Control Valve at no charge.
These controls allow operators to reduce flow without stalling the pump.

Air Diaphragm Pumps Explained

3/4″ Air Pump Specification:

Max. Flow: 17 gpm (64.6 lpm)
Max. Air Pressure: 120 psi (8.2 bar)

(3/8″ Air Pumps – Flow: 9 gpm)

(1″ Air Pumps – Flow: 41 gpm)

3/4 in. Plastic Pumps – A075

Max Solids: 1/8 in. (3.2 mm)
Max Suction Lift (Dry): 15 ft-H₂O Max Suction Lift (Wet): 26 ft-H₂O
Air Inlet: 1/4 in. FNPT

Available Build Materials:

Diaphragm: Geolast®, PTFE, Santoprene®, Viton® / FKM
Balls: Geolast®, PTFE, Santoprene®, Viton® / FKM
Seats: Polypropylene, PVDF, Stainless
O-Rings: Buna-N, EPDM, PTFE, Viton® / FKM
Liquid Connections Available in: FNPT, FBSPT
Hardware: PTFE Coated Stainless Steel, Stainless Steel

Polypropylene Air Diaphragm Pumps

A075-NPP-GGPN-S70

Polypropylene – Intermediate
Polypropylene – Fluid Chamber
Geolast® – Diaphragm Material
Geolast®– Valve/Ball Material
Polypropylene – Valve Seat
Nitrile – O-Rings
NPT(BSP) – Fitting

A075-NPP-SSPE-S70

Polypropylene – Intermediate
Polypropylene – Fluid Chamber
Santoprene® – Diaphragm
Santoprene® – Valve/Ball
Polypropylene – Valve Seat
EPDM – O-Rings
NPT(BSP) – Fitting

A075-NPP-TTPT-S70

Polypropylene – Intermediate
Polypropylene – Fluid Chamber
PTFE – Diaphragm
PTFE – Valve/Ball
Polypropylene – Valve Seat
PTFE – O-Rings
NPT(BSP) – Fitting

PVDF Air Diaphragm Pumps

A075-NPK-SSKE-S70

Polypropylene – Intermediate
PVDF – Fluid Chamber Material
Santoprene® – Diaphragm
Santoprene®– Valve/Ball
PVDF – Valve Seat
EPDM – O-Rings
NPT(BSPT) – Fitting

A075-NPK-TTKT-S70

Polypropylene – Intermediate
PVDF – Fluid Chamber
PTFE – Diaphragm
PTFE – Valve/Ball
PVDF – Valve Seat
PTFE – O-Rings
NPT(BSPT) – Fitting

Conductive Nylon Air Pumps

A075-NA3-TT3T-A70

Polypropylene – Intermediate
Conductive Nylon – Fluid Chamber
PTFE – Diaphragm
PTFE – Valve/Ball
Stainless Steel – Valve Seat
PTFE – O-Rings
NPT(BSPT) – Fitting

A075-NAA-TTYT-A30

Aluminium – Intermediate
Aluminium – Fluid Chamber
PTFE – Diaphragm
PTFE – Valve/Ball
Nylon – Valve Seat
PTFE – O-Rings
NPT(BSPT) – Fitting

Air driven diaphragm pumps are a great solution for recirculating contaminated pressroom chemistry, functioning trouble free even under the harshest conditions.

Adopt the Genesis® range of Pressroom Solutions TODAY!

Check out our Very Competitive Air Pump Pricing

Contact For Pricing

Download Brochure

1/2″ Air Diaphragm Pumps

All-Flo have a very large selection of 1/2″ Air Diaphragm Pumps, these are their best selling 1/2″ Air Pumps, please check Chemical Compatibility with your application. If you need different chemical resistance please contact Amerikal, or All-Flo directly.

# IMPORTANT NOTE#
Amerikal supplies all our air pumps with an Air Regulator Guage and Speed Control Valve at no charge.
These controls allow operators to reduce flow without stalling the pump.

Air Diaphragm Pumps Explained

Plastic Diaphragm Pumps

1/2″ Air Pump Specification..

Max. Flow: 17 gpm (64.6 lpm)
Max. Air Pressure: 120 psi (8.2 bar)

(3/8″ Air Pumps – Flow: 9 gpm)

( 1″ Air Pumps – Flow: 41 gpm)

1/2 in. Plastic Pumps – A050

Max Solids: 1/8 in. (3.2 mm)
Max Suction Lift (Dry): 15 ft-H₂O
Max Suction Lift (Wet): 26 ft-H₂O
Air Inlet: 1/4 in. FNPT

Available Build Materials:

Wet End: Conductive Nylon, Polypropylene, PVDF
Diaphragm: Geolast®, PTFE, Santoprene®, Viton® / FKM
Balls: Geolast®, PTFE, Santoprene®, Viton® / FKM
Seats: Nylon, Polypropylene, PVDF
O-Rings: Buna-N, EPDM, PTFE, Viton® / FKM
Hardware: PTFE Coated Stainless Steel, Stainless Steel

Polypropylene Air Diaphragm Pumps

A050-SPP-GGPN-S70

Polypropylene – Intermediate Material
Polypropylene – Fluid Chamber Material
Geolast® – Diaphragm Material
Geolast®– Valve/Ball Material
Polypropylene – Valve Seat Material
Nitrile – O-Rings
NPT(BSP) – Fitting

A050-SPP-SSPE-S70

Polypropylene – Intermediate Material
Polypropylene – Fluid Chamber Material
Santoprene® – Diaphragm Material
Santoprene® – Valve/Ball Material
Polypropylene – Valve Seat Material
EPDM – O-Rings
NPT(BSP) – Fitting

A050-SPP-TTPT-S70

Polypropylene – Intermediate Material
Polypropylene – Fluid Chamber Material
PTFE – Diaphragm Material
PTFE – Valve/Ball Material
Polypropylene – Valve Seat Material
PTFE – O-Rings
NPT(BSP) – Fitting

PVDF Air Diaphragm Pumps

A050-SPK-SSKE-S70

Polypropylene – Intermediate Material
PVDF – Fluid Chamber Material
Santoprene® – Diaphragm Material
Santoprene®– Valve/Ball Material
PVDF – Valve Seat Material
EPDM – O-Rings
NPT(BSP) – Fitting

A050-SPK-TTKT-S70

Polypropylene – Intermediate Material
PVDF – Fluid Chamber Material
PTFE – Diaphragm Material
PTFE – Valve/Ball Material
PVDF – Valve Seat Material
PTFE – O-Rings
NPT(BSP) – Fitting

Conductive Nylon Air Pumps

A050-SPY-TT3T-SF0

Polypropylene – Intermediate Material
Conductive Nylon – Fluid Chamber Material
PTFE – Diaphragm Material
PTFE – Valve/Ball Material
Stainless Steel – Valve Seat Material
PTFE – O-Rings
NPT(BSP) – Fitting

Metal Diaphragm Pumps

1/2″ Air Pump Specification..

Max. Flow: 15 gpm
Max. Air Pressure: 120 psi

( 1″ Air Pumps – Flow: 48 gpm)

1/2 in. Metal Pumps – A050

Max Solids: 1/8 in. (3.2 mm)
Max Suction Lift (Dry): 15 ft-H₂O
Max Suction Lift (Wet): 31 ft-H₂O
Air Inlet: 1/4 in. FNPT

Available Build Materials:

Wet End: Aluminum, Anodized Aluminum, Stainless Steel
Diaphragm: Geolast®, PTFE, Santoprene®, Viton® / FKM
Balls: Geolast®, PTFE, Santoprene®, Stainless Steel, Viton® / FKM
Seats: Aluminum, Nylon, Polypropylene, Stainless Steel
O-Rings: Buna-N, EPDM, PTFE, Viton® / FKM
Hardware: Stainless Steel, Zinc Plated Steel

Air driven diaphragm pumps are a great solution for recirculating contaminated pressroom chemistry, functioning trouble free even under the harshest conditions.

Adopt the Genesis® range of Pressroom Solutions TODAY!

Check out our Very Competitive Air Pump Pricing

Contact For Pricing

Download Plastic Pump Brochure

Download Metal Pump Brochure

3/8″ Air Diaphragm Pumps

All-Flo have a very large selection of 3/8″ Air Diaphragm Pumps, these are their best selling 3/8″ Air Pumps, please check Chemical Compatibility with your application. If you need different chemical resistance please contact Amerikal, or All-Flo directly.

# IMPORTANT NOTE#
Amerikal supplies all our air pumps with an Air Regulator Guage and Speed Control Valve at no charge.
These controls allow operators to reduce flow without stalling the pump.

Air Diaphragm Pumps Explained

3/8″ Pump Specification..

Max. Flow: 9 gpm (34 lpm)
Max. Air Pressure: 120 psi (8.2 bar)

(1/4″ Air Pumps – Flow: 5.7 gpm)

(1/2″ Air Pumps – Flow: 17 gpm)

3/8 in. Plastic Pumps – C038

Max Solids: 1/16 in. (1.6 mm)
Max Suction Lift (Dry): 15 ft-H₂O
Max Suction Lift (Wet): 26 ft-H₂O
Air Inlet: 1/4 in. FNPT

Available Build Materials:

Wet End: Conductive Nylon, Polypropylene, PVDF
Diaphragm: Geolast®, PTFE, Santoprene®
Balls: Geolast®, PTFE, Santoprene®, Viton® / FKM
Seats: Polypropylene, PVDF
O-Rings: Buna-N, EPDM, PTFE, Viton® / FKM
Hardware: PTFE Coated Stainless Steel, Stainless Steel

Polypropylene Air Diaphragm Pumps

C038-SQP-GGPN-S70

Polypropylene – Intermediate Material
Polypropylene – Fluid Chamber Material
Geolast® – Diaphragm Material
Geolast®– Valve/Ball Material
Polypropylene – Valve Seat Material
Nitrile – O-Rings
NPT(BSP) – Fitting

C038-SQP-SSPE-S70

Polypropylene – Intermediate Material
Polypropylene – Fluid Chamber Material
Santoprene® – Diaphragm Material
Santoprene® – Valve/Ball Material
Polypropylene – Valve Seat Material
EPDM – O-Rings
NPT(BSP) – Fitting

C038-SQP-TTPT-S70

Polypropylene – Intermediate Material
Polypropylene – Fluid Chamber Material
PTFE – Diaphragm Material
PTFE – Valve/Ball Material
Polypropylene – Valve Seat Material
PTFE – O-Rings
NPT(BSP) – Fitting

PVDF Air Diaphragm Pumps

C038-SQK-SSKE-S70

Polypropylene – Intermediate Material
PVDF – Fluid Chamber Material
Santoprene® – Diaphragm Material
Santoprene®– Valve/Ball Material
PVDF – Valve Seat Material
EPDM – O-Rings
NPT(BSP) – Fitting

C038-SQK-TVKT-S70

Polypropylene – Intermediate Material
PVDF – Fluid Chamber Material
PTFE – Diaphragm Material
PTFE – Valve/Ball Material
PVDF – Valve Seat Material
PTFE – O-Rings
NPT(BSP) – Fitting

Conductive Nylon Air Pumps

C038-SQY-TT3T-SF0

Polypropylene – Intermediate Material
Conductive Nylon – Fluid Chamber Material
PTFE – Diaphragm Material
PTFE – Valve/Ball Material
Stainless Steel – Valve Seat Material
PTFE – O-Rings
NPT(BSP) – Fitting

Air driven diaphragm pumps are a great solution for recirculating contaminated pressroom chemistry, functioning trouble free even under the harshest conditions.

Adopt the Genesis® range of Pressroom Solutions TODAY!

Check out our Very Competitive Pump Pricing

Contact For Pricing

Download Brochure

1 Inch Air Diaphragm Pump – C100-NPP-TTPT-G70

1″ Air Diaphragm Pump
C100-NPP-TTPT-G70

Amerikal uses this 1″ air diaphragm pump in our own circulators, not only is it very reliable it has resistance to most of the chemicals used throughout the printing industry.

# IMPORTANT NOTE#
Amerikal supplies all our pumps with an Air Regulator Guage and Speed Control Valve at no charge.
These controls allow operators to reduce flow without stalling the pump.

1″ Pump Specification..

Max. Flow: 40 gpm (152 lpm)
Max. Air Pressure: 100 psi (6.8 bar)

Pump Materials..

Choosing the right pump for an application can be complicated and confusing, pressroom chemicals will attack seals, diaphragm materials, even the casing so Amerikal uses..

Polypropylene – Intermediate Material
Polypropylene – Fluid Chamber Material
PTFE – Diaphragm Material
PTFE – Valve/Ball Material
Polypropylene – Valve Seat Material
PTFE – O-Rings

Please ensure these materials are correct for your specific application

Chemical Compatibility

Connections, please specify required type..

NPT – National Pipe Thread
BSP – British Pipe Thread
ANSI/DIN Flange

Air driven diaphragm pumps are a great solution for recirculating contaminated pressroom chemistry, functioning trouble free even under the harshest conditions.

Adopt the Genesis® range of Pressroom Solutions TODAY!

Check out our Very Competitive Pump Pricing

Contact For Pricing

Download Brochure

1/4″ Air Diaphragm Pumps

All-Flo have a very large selection of 1/4″ Air Diaphragm Pumps, these are their best selling 1/4″ Air Pumps, please check Chemical Compatibility with your application. If you need different chemical resistance please contact Amerikal, or All-Flo directly.

# IMPORTANT NOTE#
Amerikal supplies all our air pumps with an Air Regulator Guage and Speed Control Valve at no charge.
These controls allow operators to reduce flow without stalling the pump.

Air Diaphragm Pumps Explained

1/4″ Pump Specification..

Max. Flow: 5.7 gpm (21.6 lpm)
Max. Air Pressure: 120 psi (8.2 bar)

(3/8″ Air Pumps – Flow: 9 gpm)

1/4 in. Plastic Pumps – A025

Max Solids: 1/16 in. (1.6 mm)
Max Suction Lift (Dry): 14 ft-H₂O
Max Suction Lift (Wet): 28 ft-H₂O
Air Inlet: 1/4 in. FNPT

Available Build Materials:

Wet End: Polypropylene, PVDF
Air End: Polypropylene
Diaphragm: Geolast®, PTFE, Santoprene®
Balls: Geolast®, PTFE, Santoprene®
Seats: Polypropylene, PVDF
O-Rings: Buna-N, EPDM, PTFE, Viton® / FKM
Hardware: PTFE Coated Stainless Steel, Stainless Steel

These are the best selling 1/4″ All-Flo Air Pumps. If you need different chemical resistance please contact us or All-Flo directly.

Polypropylene Air Diaphragm Pumps

A025-SPP-GGPN-S70

Polypropylene – Intermediate Material
Polypropylene – Fluid Chamber Material
Geolast® – Diaphragm Material
Geolast®– Valve/Ball Material
Polypropylene – Valve Seat Material
Buna-N – O-Rings
FNPS – Fitting

A025-SPP-SSPE-S70

Polypropylene – Intermediate Material
Polypropylene – Fluid Chamber Material
Santoprene® – Diaphragm Material
Santoprene® – Valve/Ball Material
Polypropylene – Valve Seat Material
EPDM – O-Rings
FNPS – Fitting

A025-SPP-TTPV-S70

Polypropylene – Intermediate Material
Polypropylene – Fluid Chamber Material
PTFE – Diaphragm Material
PTFE – Valve/Ball Material
Polypropylene – Valve Seat Material
Viton – O-Rings
FNPS – Fitting

PVDF Air Diaphragm Pumps

A025-SPK-SSKE-S70

Polypropylene – Intermediate Material
PVDF – Fluid Chamber Material
Santoprene® – Diaphragm Material
Santoprene®– Valve/Ball Material
PVDF – Valve Seat Material
EPDM – O-Rings
FNPS – Fitting

A025-SPK-TTKV-S70

Polypropylene – Intermediate Material
PVDF – Fluid Chamber Material
PTFE – Diaphragm Material
PTFE – Valve/Ball Material
PVDF – Valve Seat Material
Viton® – O-Rings
FNPS – Fitting

Air driven diaphragm pumps are a great solution for recirculating contaminated pressroom chemistry, functioning trouble free even under the harshest conditions.

Adopt the Genesis® range of Pressroom Solutions TODAY!

Check out our Very Competitive Pump Pricing

Contact For Pricing

Download Brochure

Air Operated Double Diaphragm Pumps Explained

Air Operated Double
Diaphragm Pumps Explained

High Quality Air Pumps for The Printing Industry

Amerikal is a distributor for All-Flo “THE” quality manufacturer for air operated double diaphragm pumps.
Due to their operation and construction explained below, diaphragm pumps are uniquely suited to the harsh environments and chemical resistance needed to operate trouble free in printing operations 24/7/365.

Amerikal is very pleased to be able to offer the entire range of All-Flo pumps to all industries, not only below list price, but we also include an..

Air Regulator / Gauge plus a Speed Control Valve at no additional charge.

Diaphragm Pump Selection Guide

Main Advantages of Air Diaphragm Pumps



Run Dry

While alternate pumps will cavitate, overheat, or simply fail, diaphragm pumps can handle interuptions in fluid supply.

\

Self Priming

Diaphragm pumps will not only run dry without damage if flow is interupted, they will self prime when fluid becomes available.

N

Solid Contaminants

Having minimal internal parts solid contaminents of a certain size can pass straight through the pump without damage.
Check Specifications

U

Chemical Resistance

Pumps are fabricated from many chemical resistant materials, chose the correct materials for your application.

Chemical Chart

DESIGNED TO REDUCE
ENERGY COSTS

[et_pb_hw_image_zoom src=”https://amerikal.com/wp-content/uploads/High-Efficiency-Pump.png” hw_iz_zoom_on=”on” hw_iz_zoom_amount=”1.5″ hw_iz_zoom_speed=”2.5″ _builder_version=”3.22.7″ _i=”1″ _address=”1.0.1″][/et_pb_hw_image_zoom]

Designed to ensure significant energy savings for customers, All-Flo pumps raise the bar on efficiency standards across the industry. The newly-designed All-Flo pumps boast a high-efficiency air valve, making them the most energy efficient and cost-effective pumps in the industry

Simple Design

All-Flo’s simple air valve design allows for maximum efficiency

Simple Repair

Simple leak free bolted
design promotes swift
and seamless repairs

Operating Costs

All-Flo pumps yield
energy savings of
35-67% v competitors

Connection and Footprint

Multiple connection
types & footprint to match
competitors’ models

How an Air Operated Double Diaphragm Pump Works

Download Product Catalog

Best Selling All-Flo Pumps

Plastic Diaphragm Pumps

All-Flo Plastic Pumps are available in:

1/4" Pump - A025

Max Flow: 5.7 gpm
Max Solids: 1/16 in.
Max Lift (Dry): 14 ft-H₂O
Max Lift (Wet): 28 ft-H₂O

1" Pump - A100

Max Flow: 41 gpm
Max Solids: 1/4 in.
Max Lift (Dry): 15 ft-H₂O
Max Lift (Wet): 26 ft-H₂O

3/8" Pump - C038

Max Flow: 9 gpm
Max Solids: 1/16 in.
Max Lift (Dry): 15 ft-H₂O
Max Lift (Wet): 26 ft-H₂O

11/2" Pump - C150

Max Flow: 130 gpm
Max Solids: 1/4 in.
Max Lift (Dry): 13 ft-H₂O
Max Lift (Wet): 26 ft-H₂O

1/2" Pump - A050

Max Flow: 17 gpm
Max Solids: 1/8 in.
Max Lift (Dry): 15 ft-H₂O
Max Lift (Wet): 26 ft-H₂O

2" Pump - A200

Max Flow: 160 gpm
Max Solids: 1/4 in.
Max Lift (Dry): 17 ft-H₂O
Max Lift (Wet): 29 ft-H₂O

3/4" Pump - A075

Max Flow: 17 gpm
Max Solids: 1/8 in.
Max Lift (Dry): 15 ft-H₂O
Max Lift (Wet): 26 ft-H₂O

Metal Diaphragm Pumps

All-Flo Metal Pumps are available in:

1/2" Pump - A050

Max Flow: 15 gpm
Max Solids: 1/8 in.
Max Lift (Dry): 15 ft-H₂O
Max Lift (Wet): 31 ft-H₂O

3" Pump - A300

Max Flow: 235 gpm
Max Solids: 7/16 in.
Max Lift (Dry): 20 ft-H₂O
Max Lift (Wet): 31 ft-H₂O

1" Pump - A100

Max Flow: 48 gpm
Max Solids: 1/4 in.
Max Lift (Dry): 17 ft-H₂O
Max Lift (Wet): 30 ft-H₂O

11/2" Pump - A150

4Max Flow: 115 gpm
Max Solids: 1/8 in.
Max Lift (Dry): 22 ft-H₂O
Max Lift (Wet): 31 ft-H₂O

2" Pump - A200

Max Flow: 190 gpm
Max Solids: 1/4 in.
Max Lift (Dry): 24 ft-H₂O
Max Lift (Wet): 31 ft-H₂O

Contact Amerikal For Pricing

Higher Quality does not need to cost more – No-one Beats our Prices

See How Much You Can Save!

Multi Press Fountain Solution System

Multi – Press / Pressroom

Fountain Solution Management System

Complete Pressroom Management..

Don’t settle for yesterday’s technology when you can use tomorrow’s smart technology from Amerikal today.

It simply does not make sense to have a tank of 100 Gallons + of chilled water feeding your entire pressroom. Even with chilled circulating loops there is no control and the furthest press gets the warmest water.

Not only that but the long runs pick up all the heat in the pressroom so your chiller needs to work twice as hard to maintain temperature.

Introducing Amerikal’s Smart Pressroom Solution, our Multi-Press Fountain Solution Management System address all the negatives of a plant wide system, while providing accurately mixed fountain solution at the exact required temperature to all your machines. Only one machine? See Fountain Solution Management System

How do we do this….

Main Tank

First and foremost you need the correct fountain solution mixture, Amerikal incorporates our industry leading double additive proportioner to precisely control, fountain solution and additive mixing down to 1/10th of an ounce/gallon.

Accurate mixing saves $$$ by eliminating over consumption of fountain solution but more importantly weak mixes that will quickly generate excessive press waste.

Once you have the correctly mixed fountain solution it requires storing in a sufficient quantity to feed pressroom demand, so Amerikal utilizes a 100 gallon vessel for storage, but it doesn’t stop there. Unlike most pressroom fountain solution systems we do not keep a bath of chilled water hundreds of feet from the press & we do not return press contaminated water back into the tank. The Amerikal storage tank is continuously agitated via a spillback to avoid separation but more importantly feeds fresh fount to each press on demand preventing cross press contamination.

At the Press

The primary function of any press side fountain solution tank is to circulate and filter, unfortunately most manufacturers do not understand the importance of flow to control pan temperatures so have restricted feeds and many times venturi returns.
Amerikal used positive feeds and power drains to increase the flow rate across the pan, reducing operator / gear temperature differences as well as the delta T (temp increase in the water), significantly reducing the energy required to maintain temperature.

Chilling

Amerikal’s Multi-Press Fountain Solution Management System does not chill the main tank, we chill where it is needed “the pan feed line” By chilling on the way to the water pans energy usage and temperature fluctuations are kept to an absolute minimum. Our press side chillers are self contained 120V Industrial Water Chillers and are an inexpensive plug in solution for our system or any tank that has a failed refrigeration unit.

Contact Us for more information.

Circulator Chiller Broken? – NO PROBLEM

Amerikal has developed two smart solutions for printers who have lost there chiller tank compressor.

Heat Exchanger – Slide in Unit replaces the Broken Compressor
Stand Alone 120V Industrial Water Chiller – No Need to Repair when you can replace for a fraction of the cost

Adopt the Genesis® range of pressroom chemicals TODAY!

Amerikal's - Fountain Solution Management System

MORE INFORMATION!

Water Pan Insulation

No more Condensation or Dripping from your Water Trays

Water Pan Insulation..

Finally No more drips!
Nothing is more annoying than losing a web or having ink emulsify because of water pan condensation dripping onto the web or rollers. Water tray insulation is critical if you wish to have even temperatures across the width of the press. Flow rates capable of maintaining an even temperature while disbursing the cold fountain solution across the width of the water pan will also generate condensation if the trays are not adequately insulated.

Amerikal has developed a proprietary water pan insulation that stands up to the riggers of the press room environment. Our insulation combined with a flexible coating and edge sealant prepares pans for the onslaught of pressroom chemicals while performing better than any OEM insulation.

Water Pan Insulation ensures you can maintain fountain solution at a lower temperature over the entire width of the press with minimal delta T

Also see Fountain Solution Management

Adopt the Genesis® range of Pressroom Solutions TODAY!

Stop The Drips & All The Associated Issues

For Better Circulation – Ask us about adding feed tubes into your trays

GET INSULATED

Download Brochure

PRIMARY FILTER

Fountain Solution Primary Filter Housing

Primary Filter Housing..

Stop contaminants feeding back into your fountain solution tank and contaminating your entire system by using Amerikal’s primary filters. Stainless steel filter canisters can be opened during production to quickly change our inexpensive bag filters.

Smart but Simple Solution to annoying feedback issues

Use our Fountain Solution Primary filters in combination with our

Pipe Supports and Pipe Tree Drops

Adopt the Genesis® range of Pressroom Solutions TODAY!

Fountain Solution Primary Filter Housing

Contact For Pricing

Download Brochure

Silicone Tank Proportioning System

Silicone Tank & Proportioning System

Silicone Tank..

No more buckets or tubs filled with old contaminated silicone at varying concentrations. Amerikal has developed a “Silicone Tank” specifically for the application.

316 stainless steel tank for durability and ease of cleaning
Level Control – Mixes on-demand for fresh silicone
Water pressure activated proportioning pump
Filtration – Removes Fibers and other contaminants
Pump down for easy cleaning

Silicone Proportioning System

Chemical resistant feed pump is capable of 10 GPM
Check Valve on Silicone Feed Line
Pressure regulator assures accuracy and consistency

Accurate proportioning is central to Amerikal’s ethos of consistency enables repeatability.
Also see our Fountain Solution Proportioner

Adopt the Genesis® range of Pressroom Solutions TODAY!

Silicone Tank and Proportioning System

Contact For Pricing

Download Brochure

Pipe Supports and Tree Drops

Pipe Supports and Floor Mount Tree Drops

Professional “Off Floor” Equipment Piping Feeds and Returns

Organize your equipments feed and return lines

Do you have pipes laying all over the floor behind your equipment?
Is it impossible to clean around them?
Can you remove the pipes for access?

Our Quick Disconnect Pipe Supports and Floor Mount Pipe Drop Trees put an end to this piping nightmare by keeping all your pipes off the floor high enough to sweep underneath while allowing easy removal if access is required.

Safer Cleaner

Does the back of your equipment resemble a swamp? Absorbent mats and socks are not the solution, CLEANING is.
Leaks and spills are not only a slip safety hazard, unaddressed they can also turn into bacteria farms. Our stainless welded raised piping brackets keep your piping off the floor and are high enough to easily clean up any leaks or spills with a mop and broom.
Need access for maintenance? No problem, our quick release pipe clips make removing all the plumbing a breeze.

Pipe Drops

Running feeds and returns to and from your equipment is simple with the utilization of floor mounted pipe trees. Amerikal’s floor mount pipe trees give stability to your utility drops while keeping a small footprint.

Amerikal’s Pipe Trees also utilize quick release pipe clips making removal and or replacement fast and simple.

The Smart Solution to Pipe Runs

Contact For Pricing

Stainless Pipe Supports

Download Brochure

Floor Mount Pipe Tree

Download Brochure

Water Purification System

As we researched municipal and well water contamination around the USA it became blatantly obvious that there was a VERY simple Solution…

Introducing Amerikal’s
Water Purification System

Amerikal has developed an inexpensive whole house/small business water filtration and purification solution that transforms even the most unpalatable well water into clean odorless “potable” drinking water.
Put an end to contaminated well and municipal water once and for all!

Many municipalities add anti-corrosion additives into their water along with chlorine.
These additives coat the water pipes along with the insides of your appliances and coffee makers.

The Amerikal filters remove most of these additives and more resulting in longer appliance life and better tasting water & coffee.

What It Does.

By utilizing a specific post treatment filter together with our Hydrogen Peroxide adjustable proportioner, the Amerikal Water Purification System will kill and remove odor, bacteria, sediment and rust from your water source.

Leaving your water potable, crystal clear & fit for drinking, cooking or washing.

Nobody wants living things in their water, unfortunatly bacteria in water is common place and not just in contaminated well water, but in municipal water too.
Our proprietary peroxide H₂O₂water treatment system KILLS ALL BACTERIA while dispercing without a trace.
You will be amazed just how clean we can make your water.

Made To Fit

Our Water Purification System cabinets can be assembled, stacked, or in left and right hand configurations.

Install in the Garage, Basement, Crawlspace or a handy Closet.

Exceptional By Design, Quality and Simplicity

Decrease in Toilet, Tub, Tile Staining
Increased Appliance Life
Cleaner and Healthier Rinsed Fruit and Veg
Decrease in Damaged Clothing
No Electrical Connection Required
Increased Property Value

Don’t live with contaminated water, Amerikal has the economical solution for converting well water into potable drinking water

Contaminants vary significantly from well to well and municipality to municipality. Your local authorized installation contractor will determine if Amerikal’s water purification system is suitable for your particular water source.

Sparkling Clean Water From Amerikal

Water Purification Systems are installed and maintained by
qualified local contractors

Contact Us

CONTRACTOR APPLICATION

CONTRACTOR INSTALLATION VIDEO

Dock Blankets

DOCK BLANKETS

ARE YOUR HEATING BILLS TOO HIGH?

Dock doors are one of the major causes of heat loss!

Amerikal has developed an industrial strength dock blanket that can stand up to the day to day riggers of shipping and receiving while saving $100’s on your heating bills.

With Dock Blankets from Amerikal, Stop the cold air getting in, make your warehouse a comfortable place to work without the furnaces blowing 24/7

DESIGNED AND MANUFACTURED TO SAVE ENERGY

ENERGY SAVINGS SOLUTION IN CONTROLLING INDOOR TEMPERATURE
PREVENTS TRANSFER OF AIR IN AND OUT OF DOCK AREA
STOPS RAIN AND SNOW FROM ENTERING DOCK AREA

Durability

We design and construct our blankets with the rigours of use and abuse in mind. Our own are 5 years old and counting…

Padded Insulation

Incorporated padding in the dock blanket adds an additional layer of insulation from the cold metal dock plate.

Patented Hinge Bar

Patented hardware utilizes the doors own hinge mechanism, evenly distributing the dock blankets weight.

Magnetic Strips

Proprietary Magnetic Strips securely seal the blanket to the dock plate eliminating cold air intrusion from under the dock blanket.

Feel The Difference

If you live in a cold climate & have spent any time in shipping and receiving you know just how cold docks and dock plates can get.

Seal off those bone chilling draft,
dust and snow. Make the work environment better, and save hundreds on heating in the process.

Get your Insulated Dock Plates Today!

PROMOTES CLEANLINESS

KEEPS DOCK FREE OF DUST, DEBRIS AND OUTDOOR ELEMENTS
BLOCKS GAPS WHERE INSECTS CAN ENTER THE FACILITY
WATER, FUNGUS & MILDEW RESISTANT, SIMPLE INSTALLATION
EASY INSTALLATION TAKES LESS THAN 10 MINUTES
DOCK BLANKET INSTALLATION KIT CONTAINS 5 COMPONENTS
WRENCH, SOCKET AND RATCHET ARE THE ONLY TOOLS REQUIRED

DOCK BLANKET SPECIFICATIONS

KIT INCLUDES:
■ 85” x 104” Dock Blanket weight – 16.4 pounds ½” high density foam insulation,
water, fungus & mildew resistant
■ Stainless Steel Double Collar Hook (1)
■ Stainless Steel Single Collar Hooks (2)
■ 3/8-16” Serrated Flange Nuts (4)
■ 3/8” x 95.5” Steel Rods (2)
■ NOTE! On manual door systems it may be necessary for the overhead door torsion spring tension to be increased due to the weight of the
Dock Blanket System. This service should be conducted by a professional overhead door service company.

SAVE BIG On Your Heating Bills
While Warming Up Your Warehouse

Contact Amerikal Today

Download Brochure

Chemical Proportioning System

Chemical Proportioning System..

Accuracy of your proportioning system is critical when it comes to maintaining a consistent ink / water balance. Variations in percentage dosing can quickly send your operation into a tailspin with pressmen chasing ghosts on press.

Our proprietary seals ensure you are receiving the right mix of fountain solution to water with accuracy to a tenth of an ounce.

Features & Benefits

Capable of proportioning 0–8 ounces per US gallon of chemical concentrate at a rate of 8 GPM (gallons per minute)
Pump is capable of mixing at tenths of an ounce, i.e., 4.1, 4.2, 4.3 ounces per gallon
No electricity is necessary
Proportioning pump is enclosed in a tamper resistant locking cabinet
Affordable price and simple to install
Anti-syphon backflow preventer – Feed pipe is always full
Six month parts and labor warranty
Standard mounting hardware makes installation quick and simple

Amerikal also offers dual proportioners for the addition of
second step additives / additional chemicals.

Also see our Silicone Tank Proportioning System

The Same Mixture Each And Every Gallon

Contact Amerikal For Pricing

Download Brochure

I.Mer A.C.C. Automatic Cassette Changer

I.Mer A.C.C. Automatic
Cassette Changer

Automaticly Change Ink Cassettes

I.Mer Smart Technology

I.P.C Ink Preset Control – Divided Ductor

Area Reader Ink Preset (Cip3)

A.F.C Auto Fountain Cleaner

A.C.C Auto Cassette Changer

Visit I.Mer directly at..
http://www.imer.jp/english/index.html

Area Reader

AREA READER – Cip3 Preset

Area Reader For Automatically Setting Ink

I.Mer Smart Technology

I.P.C Ink Preset Control – Divided Ductor

Area Reader Ink Preset (Cip3)

A.F.C Auto Fountain Cleaner

A.C.C Auto Cassette Changer

From Platesetter to Press..
Auto Processing of Pre-press .PPF files makes light work of Press Cip3 Auto-setting

SET & FORGET

Area Reader Technology Enables…

Set press configuration
Set plate Size
Preset IPC or ink key system parameters
Set Rotation / Mirror
Auto process for multiple press sizes
Output to different press specific folders
Hot Folder Auto Processing
Process folder as single job
Open and Inspect PPF Files
Color preview / coverage calculation
Auto Process PPF, PDF or TIFF files
Auto delete old files

And a host of other features

Temperature Control Units (TCU’s)

Amerikal TCU’s..

It may not be immediately obvious, but temperature plays as large a part in a press performance as the chemistry.

Temperature variations from operator to gear require that the press operator try to balance the water across the width to compensate. Needless to say the operator side gets too much water in the process.

Aside from these obvious water balance issues, inconsistency in temperatures makes it impossible to fully utilize Cip3 presetting as Ink Tack & Body are also impacted rendering the presets useless.

In conclusion Varying Temperatures = Varying Results

Don’t fight your equipment! Ensure your ink and water settings are consistent. Our TCUs contain heating elements so even a cold press’s inker is up to operational temperature.

Fountain Solution Circulator – Temperature Control

Keeping the printing units at an even temperature is achieved by the Zone Control in combination with the Fountain Solution Circulator It is imperative that the temperature in the water trays is even from gear to operator.
Amerikal’s circulators achieve this by chilling the fountain solution on the way to the press and utilizing power drains to generate high flow rates.

Circulator Chiller Broken? – NO PROBLEM

Amerikal has developed two smart solutions for printers who have lost there chiller tank compressor.

Heat Exchanger – Slide in Unit replaces the Broken Compressor
Stand Alone 120V Industrial Water Chiller – No Need to Repair when you can replace for a fraction of the cost

Temperature Control is just as important as the the chemicals you use.
Consistent and even press temperatures ensure your press performs at its optimum.

Adopt the Genesis® range of Pressroom Chemicals & Smart Technology TODAY!

Get the Control You Need With a TCU from Amerikal

Get Pricing Today!

Download Brochure

Smart Technology

Fountain Solution Management System

Complete Management..

Don’t settle for yesterday’s technology when you can use tomorrow’s smart technology from Amerikal today.

It simply does not make sense to have a bath of chilled water sitting behind your machine, while your water trays have varying degrees of warm water in them.

Amerikal have addressed this issue in two ways, first and foremost we chill on the way to the press not in the tank, & secondly we significantly increase the flow rate across the pan, reducing the delta T (temp increase in the water).

Not only does this provide a far more even temperature across the width of the press, it also significantly reduces the energy required.

But we didn’t stop there..
While our fountain solution system does have a 30 gallon tank enabling an automatic press pump-down, it does not operate full. On the contrary, fountain solution is mixed just in time & is power returned through over 40 square feet of 20 micron filter ensuring the fountain solution in your water trays is as fresh and clean as possible for optimum performance.

Match this with our chemical proportioner system capable of 0.1 oz / gallon portion accuracy & you have a complete fountain solution management system capable of consistently & repeatedly supplying your machine with the right amount of fountain solution at the set temperature 24/7/365.

Due to customer requests Amerikal now offers a smart multiple press solution. Feed multiple presses with cool filtered fountain solution “WITHOUT” potential cross contamination or temperature control issues. Contact Us for more information.

Circulator Chiller Broken? – NO PROBLEM

Amerikal has developed two smart solutions for printers who have lost there chiller tank compressor.

Heat Exchanger – Slide in Unit replaces the Broken Compressor
Stand Alone 120V Industrial Water Chiller – No Need to Repair when you can replace for a fraction of the cost

Adopt the Genesis® range of pressroom chemicals TODAY!

Amerikal's - Fountain Solution Management System

MORE INFORMATION!

Download Brochure

IMER AFC Automatic Fountain Cleaner

I.Mer – A.F.C. Automatic Fountain Cleaner

Automatically Clean Press Fountain And Fountain Roller

I.Mer Smart Technology

I.P.C Ink Preset Control – Divided Ductor

Area Reader Ink Preset (Cip3)

A.F.C Auto Fountain Cleaner

A.C.C Auto Cassette Changer

By eliminating the ink keys with the IPC system the ink fountain now has a fixed smooth edge, perfect for wrapping a liner around.
But why stop there? The ingenious engineers at I.Mer have taken it several steps further by..

Adding a Fountain Roller Cleaner
Adding Magnetic Fountain Cheeks
Adding a Motorized Liner

As you can see in the video above, development didn’t stop there..

By incorporating an Ink Roller Wash System into the Automatic Fountain Cleaning System it is now possible to clean the entire unit or press in minutes

How much more production if you could..

Wash up in under “1 Minute”?

Update your Remote Inking System with a Divided Ductor & Auto Fountain Cleaner

Contact Us for Pricing

Download Brochure

IMer Remote Ink Control System

When we were researching Ink Control Systems capable of delivering the exact pre-calculated volume of ink to the plate, we found only one…

I.Mer Remote Ink Control System
The I.P.C – Divided Ductor Roller

De-Skill Ink Presets with a Remote Ink Control System from I.Mer

Unlike other Remote Ink Control Systems, I.Mer’s Divided Ductor Roller was developed for the VERY demanding two piece can industry. Not only did it survive this harsh environment, it thrived being retrofited to over 85 can decorators.

The main benefit of a divided ductor over conventional Remote Ink “Key” Control Systems, is the ability to transfer the exact amount of ink required in any zone without compromising other areas of the plate.

With a Divided Ductor it is possible to print solids & spot color side by side. No more spiral ductors for light coverage, or wrenches for heavy.

The operation of the Divided Ductor removes the variables associated with existing remote ink control systems.

Ink “key” system variables such as, operator sweep control, key wear, key calibration, sticking keys & hydraulic lift are all eliminated.

How It Works

The Divided Ductor System utilizes a fixed blade to establish a uniform ink film thickness on the fountain roller.

As the sweep is a fixed percentage of press speed, any hydraulic lift of the fountain roller, or film thickness variation, is repeatable & can easily be accommodated using offset parameters.

Now that a consistent ink film thickness has been established, extremely precise ink feed can be accomplished by automatically varying the dwell time of the divided ductor roller segments against the fountain roller.

If you look closely at the fountain roller you can see the ink profile reflected in the ink film.

What You Are Watching..

To the left you can see the ink fountain has a small sausage of ink maintained by the ACC system.
The fountain is lined with a thin film and enclosed with magnetic end cheeks. (See Auto Fountain Cleaner)
The fountain roller is carrying a uniform ink film thickness across the entire width.
The un-energized Divided Ductor segments maintain contact with the ink train.
When energised the segments contact the fountain roller.
The time, individual ductor segments contact the fountain roller, is dependent upon the image profile, predetermined by the Area Reader.
Contact will be longer for areas of heavy coverage.
In areas of no coverage the segments do not move.
While in very light coverage the segments energize intermittently.

Additional Video – Heidelberg with I.Mer Remote Ink Control

Designed using the KISS philosophy the Divided Ductor system eliminates many of the variables associated with ink key systems.
Pneumatically energized with spring return there are only 4 moving parts/section. The Divided Ductor system is a perfect example of less equals more.

I.Mer have successfully de-skilled not only the operation of ink setting but also the functionality of the system itself!

WAIT! There is More.. How would you Like to Wash Up in "1" Minute?

SEE HOW

Download Brochure

Amerikal Products

Amerikal SMART Technologies

There is a better way when you partner with Amerikal

In partnership with industry leaders, we are proud to offer a range of Smart Technologies that will improve your bottom line as well as your quality, working environment & environmental footprint.

All businesses would like to..

Improve Quality
Reduce Waste
Reduce Costs
Reduce Energy
Save Time
Deskill Operations

All these can be accomplished..

WORK SMARTER NOT HARDER

Everyone has heard this phrase, but very few put it into action.

Amerikal has identified many of the issues associated with offset printing and either manufactured, or partnered with innovative industry leaders, manufacturing smarter and more efficient technologies.

Fountain Solution Management System

Do you really need a 30 Gallon tank chilled to 55 Degrees?

Doesn’t it make more sense to chill the water on the way to the press?

See How Amerikal does it.. CLICK HERE.

Fountain Solution Proportioner

Consistency and repeat ability are critical if you are to maintain control of your systems. Amerikal has developed a proportioning system to ensure you get the correct mix every time.

Zone Control (TCU) - For Ink Vibrators and Chill Rolls

Consistency and Stability of print can only be achieved when the printing conditions are stable.

Temperature is a critical variable in controlling misting & print variables.

See Amerikal’s Temperature Control Units serving all press sizes and requirements